So you got your first Fender Super Champ? Pretty soon you will start asking around for a footswitch, and I tell you: This ain't easy!! You just can't buy one in a shop, since they don't match the amps designed by Paul Rivera between 1982 and 1986. And if you find an original, you must be prepared to pay 150$ for it.
On the net you'll find many different schematics that show you how to build one yourself, but I haven't seen one working yet.
The Fender Princeton Reverb II Homepage
(The princeton uses the same F/S as the SC)
How does it work?
Yet another diagram over the F/D
What does it look like?
On the inside
The "original" schematic on the Footswitch
(mailed to me from Fender!)
(Thanks to Ulrich Zmaila, Germany)
Low Resolution (534 KB)
As A Gallery
Schematic .pdf .jpg
Wiring diagram
Valves U-Like (Watford Valves)
KCA Nos Tubes - lots of good info - relevant links
...the original manual.
This mod is made up by Stratopastor.
(Neither Stratopastor nor www.superchamp.dk resume any responsibilty for your work with the amp. Remeber it contains lethal voltage!)
Parts List Champ II